How to Setup Netgear Router In AP Mode?

After you have put the Netgear router into its factory default configuration, you can use it as a router rather than an access point. Your Netgear router may have been incorrectly setup netgear router ap mode if it discovers that there is already an existing router or default gateway.

Only one router is required for the operation of a network. In light of this, when you upgrade your outdated Wi-Fi router to a newer, more powerful model, you have two options: you can either waste time trying to find someone who will gladly take the old router off your hands, or you may convert the old router into an external NetGear router AP mode. The most effective method for saturating your home with Wi-Fi is to install a do-it-yourself access point at the farthest point of your property and then connect it to your new router using a lengthy network cable. In addition, this manual will walk you through the process step by step.

More About It

In addition to performing the function of a standard router, the Wi-Fi router in your home also acts as an embedded access point (or possibly even two or three embedded APs in the event of a dual-band or tri-band router). Access points (APs) provide Wi-Fi signals to which wireless clients such as smartphones, tablets, and other devices can connect.

For the duration of this instruction manual, let’s call the new router that serves as the hub of your home network Router A. Router B is the one that is now broken and will be repurposed as an access point. The purpose of this exercise is to configure Router B so that it can act as an external access point for Router A.

You will need to change your router’s configuration from access point mode to the default router mode.

First and foremost, find the button on your Netgear router that allows you to reset it. Once you have located this, you need to take something pointed like a paperclip and place it into the Reset hole. Maintain constant pressure on the Reset button for ten seconds or until the Power LED begins to blink.

Step 2: Once you have finished resetting your NetGear Router In AP Mode, you will need to wait some time to ensure that the router boots up correctly.

The next step is to link the PC to the Netgear router using an Ethernet cable. Launch a web browser once both of your devices have been successfully connected, and then type “” into the address bar of the web browser. If you are unable to log in using, then try the following:

Step 4: At this point, you will be directed to a screen that requires you to enter your login details, which include your username and password.

  • Username – admin
  • Password – Password

Note: If the login credentials for the Netgear router are not working, you will need to conduct a factory reset on the Netgear router to restore it to the settings that were present when it was first manufactured.

Step 5: After filling in your login information, click the Continue button to proceed. The Netgear router will now check the connectivity to the internet. The question “Do you wish to set up this device in Access Point mode?” will appear on the screen of your Netgear router if it detects another gateway or router in the network.

Step 6: Select “No, I would prefer to run it in default mode as a router” by clicking the radio box in the configuration menu. After that, click the option labeled Next.

Step 7: The final step is to select the option “Take me to the internet.” As soon as you have completed those steps, you have successfully returned your Netgear router to its factory settings.

Ask the technicians at the Netgear Customer Support Number for assistance if you run into any issues while attempting to switch your access NetGear router from ap mode to the default router mode.

Contacting the Netgear Technical Support Number Will Provide You With an Instant Solution to Your Netgear Router Issues

Connect with the technical support team for the Netgear team if you are experiencing any problem with your router, and you will receive an effective solution from industry professionals. Because they have extensive experience and a wealth of technical expertise, the technical professionals accessible at Netgear’s customer support department can provide an immediate solution.

Users can contact Netgear Technical Assistance whenever needed because we are available 24 hours a day, seven days a week, to give you the best possible services. What are you waiting for, then, to find a solution that is both rapid and high-quality by contacting professionals through Netgear Live Chat Support?

When the Netgear router is configured to operate in access point mode, certain of its capabilities are disabled, and the existing gateway is responsible for operating the DHCP server. Follow the steps outlined in the following paragraphs if you cannot connect more than one device to the internet and are experiencing difficulties in doing so.

Connecting to the Netgear Router Helpline will allow you to get access to professional guidance if you cannot solve your technical problems in NetGear access point mode on your own. This is because there are times when it takes effort for users to tackle the technical issues on their own.

Sanchit Kaushal is the Co-Founder of Network Solution, a content creation company. He’s been a content marketer for over 5 years and writes for Tech, Entrepreneur, Inc and many other blogging and publications website strategy.

Leave a Comment

Your email address will not be published. Required fields are marked *